Taking a representative bottom hole fluid sample is a tedious and therefore also an expensive operation. Before a clean fluid sample can be taken, the well must be flooded for some time to remove the oil-based mud (OBM) in the near well bore area. Subsequently, a stable flow must be established from the cleaned well. …
#20 Dealing with Mud Contaminated Samples in EoS Modeling Read More »
Calsep will over the next couple of months post a series of TechTalks about simulation of fluid properties covering: Basic fluid characterization Mud contaminated samples Common EoS Fluids with water CO2 rich fluids This first TechTalk is about characterization of a single clean reservoir fluid composition. Fluid characterization was a hot topic in the early …
PVTsim Nova 5.4 has been released. It can be downloaded from Client Area for more information about the updates check out the list of updates here PVTsim Nova 5.3 to 5.4
FLUID MANAGEMENT Common EoS w/ Plus Regression Bug corrected, which in rare cases resulted in a too low molecular weight of the heaviest pseudo-component. FLOW ASSURANCE Wax Viscosity Calculations Bug corrected to ensure plots are always displayed correctly. INTERFACE MODULES OPM Input unit for salinity changed from kg salt per m3 pure water to kg …
We are pleased to announce that PVTsim Nova 5.3 has been released. Check out the list of updates for the release here: https://www.calsep.com/pvtsim-nova-5-2-to-5-3/
AUTOMATED IMPORT OF PVT DATA PRODML XML IMPORT Correction made to allow import of single phase gas densities in CME experiments. REGRESSION CHARACTERIZED REGRESSION Bug corrected in option to prevent negative kij’s. FLOW ASSURANCE EMULSION VISCOSITY CALCULATIONS Correction of oil-in water viscosity. It was previously too low. INTERFACE MODULES OPM Input menu updated to allow …
Introduction PVTsim has a comprehensive list of pure components covering not only oil and gas components, but also water, hydrate inhibitors and salts. Simulations may still be needed for mixtures with components that are not in the pure component database that comes with a PVTsim installation. In such cases, the user has the option to …
Calsep will have a booth at SPE ATCE 2022 in Houston 3-5 October 2022. Find out more about SPE ATCE 2022 here: https://www.atce.org/
Come and meet the Calsep team at ADIPEC 2022 and learn about the latest updates and features in PVTsim Nova. Find out more about ADIPEC here: https://www.adipec.com/
GUI LOOK AND FEEL HIGH RESOLUTION MONITORS Menus updated for better user experience on high resolution monitors. NEW INTERFACE MODULES TURBULENT FLUX New interface module for Turbulent Flux virtual meter. OPM New interface module for Open Porous Media (OPM) reservoir simulator. AUTOMATED IMPORT OF PVT DATA PRODML XML IMPORT Minor updates in PRODML XML version …
